BECHEM 冷轧成型油产品
8.3 冷轧成型油 ( Cold forming oils )
Bechem 冷轧成型油 Beruform 系列。
-
8.3.1 - 冷轧成型 ( Cold forming oils )
-
8.3.2 - 多功能成型油 ( Multifunctional oils )
-
8.3.3 - 添加剂及成型剂 ( Additives and forming agents )
8.3.1 - 冷轧成型 ( Cold forming oils )
产品 |
40 °C 黏度 [mm²/s] |
加工金属 |
极性添加剂 (Polar-additives) |
极压添加剂 (EP-additives) |
特性 |
Beruform KFP 49 | 36 | 钢 | x | xx |
简易到中等程度之冷轧成型油,用于单或多阶段压制成型加工,如生产中空或半中空的铆钉。 ( Cold forming oil for easy to medium forming processes on single and multiple stage presses, for the production of hollow and semi-hollow rivets ) |
Beruform KFP 10 | 64 | 钢 | xx | xxxx |
极度高要求之冷成型油,应用在如极深的拉拔操作或极长的高合金钢缩减等,采用浸渍或喷雾设备方式作业。 ( Cold forming oil for high requirements, such as very deep cupping operations, very long reductions of high-alloyed steels, application by immersion or spray devices ) |
Beruform KFP 13 | 103 | 钢 | xx | xxx |
大量成型且极度要求的低/高合金钢所用的成型油,使用浸泡或喷雾方式润滑,含高性能的防磨耗/极压添加剂,刀具寿命长。 ( Forming oil for demanding cold massive forming of low/high-alloyed steel, for immersion and spray lubrication, high performance AW/EP additives, long tool life ) |
Beruform KFP 95 | 90 | 钢, 不锈钢 | xxx | xxx |
非常苛刻条件下所用的不含氯冷成型油,如高强度碳钢及合金钢等的多重成型,刀具寿命长,油品可长效使用。 ( Chlorine-free cold forming oil for very demanding, multiple forming of high-tensile carbon steels and alloyed steels, high tool life, long lifetime in the coolant tank ) |
Beruform KFP 96 | 91 | 钢, 不锈钢 | xxx | xxxx |
如同 Beruform KFP95,但性能更强。 ( See Beruform KFP 95, however with a higher performance ) |
Beruform KFP 96 HC | 80 | 钢, 不锈钢 | xxxx | xxxx |
极度要求的成型油,具有高添加剂,特别适用于钢及高回火钢之处理,可大大减少形成部分的残留物。 ( Cold forming oil for extreme requirements with a high additive content, especially suitable for high-tempered steels and steels, considerably reduced formation of residues on formed parts ) |
Beruform KFP 95 HP | 120 | 钢, 不锈钢 | xxxx | xxxxx |
极度要求的成型油,具有高添加剂,含有极性活性物质,活性硫化合物及特殊的抗磨耗添加剂,亦适合小数量的喷雾系统。 ( Cold forming oil for extreme requirements with a high additive content, contains polar active substances, active sulfur compounds and special AW additives, also suitable for minimum quantity spray systems ) |
Beruform KFP PP-Z | 115 | 钢, 不锈钢 | xxxxx | xxxxx |
冷成型油具有极高的添加剂以及固体润滑剂,因此刀具寿命长且元件表面品质较佳,亦适合取代含氯的产品。 ( Cold forming oil with an extremely high additive and solid lubricant content, excellent tool life with excellent surface qualities, also suitable for replacing chlorine containing products ) |
8.3.2 - 多功能成型油 ( Multifunctional oils )
产品 |
40 °C 黏度 [mm²/s] |
加工金属 |
极性添加剂 (Polar-additives) |
极压添加剂 (EP-additives) |
特性 |
Beruform MF 105-68 | 68 | 钢, 铝, 铜, 黄铜 | x | x |
用于简易到中等程度的钢或黄铜的成型加工,亦适合当作机器与滑道的润滑油,如当成形油使使用时,应用于低度工具磨损的作业。 ( For easy to medium forming processes of steels and brass, also suitable as machine and slideway lubricating oil, to be used as forming oil with low tool wear ) |
Beruform MF 105-100 | 100 | 钢, 铝, 铜, 黄铜 | 1 | 1 |
如同Beruform MF 105-68,但黏度指数为100。 ( See Beruform MF 105-68, however with viscosity grade 100 ) |
Beruform MF 148 NEU | 110 | 钢, 不锈钢, 铝, 铜, 黄铜 | xxx | xxx |
不含氯之冷成型油,含高添加剂,适合大量成型中的多阶段加工处理,多功能用途可为机械及成型使用,油品本身稳定性高,可提供恒定的添加剂及保有稳定的粘度。 Chlorine-free cold forming oil with a high additive content for cold massive forming on multiple stage presses, multifunctional use as machine and forming oil providing constant additive and viscosity level |
Beruform MF 148-68 | 68 | 钢, 铝, 铜, 黄铜 | xxx | xxx |
如同Beruform MF 148 NEU,但黏度指数为68。 ( See Beruform MF 148 NEU, however with viscosity grade 68 ) |
Beruform MF 85 | 90 | 钢, 铝, 铜, 黄铜 | xx | xx |
不含氯之冷成型油,含高添加剂,适合大量成型中的多阶段加工处理,抗老化性极强,冲洗性能及润滑性能佳。 Chlorine-free multifunctional oil with a high additive content for cold massive forming on multiple stage presses, extremely resistant to ageing, improved rinsing performance and optimum lubrication properties
|
Beruform MF 155 | 110 | 钢, 不锈钢, 铝, 铜, 黄铜 | xxx | xxx |
如同 Beruform MF 85,但性能更强。 ( See Beruform MF 85, however with better performance. ) |
8.3.3 - 添加剂及成型剂 ( Additives and forming agents )
产品 |
40 °C 黏度 [mm²/s] |
加工金属 |
极性添加剂 (Polar-additives) |
极压添加剂 (EP-additives) |
特性 |
Beruform KFP PP | 69 | 钢, 不锈钢 | xxxx | xxxx |
高性能冷成型油或添加剂包,可提升传统成型油的性能,刀具寿命长且处理元件的表面品质极佳。 High-performance cold forming oil and additive package to increase the performance of conventional forming oils, excellent tool life with excellent surface qualities |
Beruform KFP 22 | - | 钢, 不锈钢 | xxxxx | xxxxx |
冷成型油,具有极高的添加剂含量,专为要求较苛刻的成冷成型加工所设计,适用于复杂的工件处理或当成添加剂包使用,以提升原有成型油的性能。 Cold forming oil with extremely high additive content for demanding forming processes, applied neat for complicated work pieces or as additive package to increase the performance of conventional forming oils |
Beruform KFP 22 P |
Pasty | 钢, 不锈钢 | xxxxx | xxxxx |
含有效成分的糊狀濃縮劑,適用於最極度要求的冷成型加工處理,亦可作為預拉伸機冷拉處理時所使用的拉伸膏。 Pasty concentrate of active ingredients, agent for most demanding processes in cold forming, also suitable as drawing paste in pre-drawing machines for the cold drawing of cold heading wires |